Coherent Beam Position Thermopile Power Sensors 1098320 | 100mW-45W

Product Details Thermopile Detector Element for High Power Measurements Measure Beam Position on Detector Surface ISO 17025 Certified Coherent Beam Position Sensing Thermopile Power Sensors are all-purpose sensors designed to measure the average power or energy of a wide variety of continuous wave or pulsed lasers. Coherent Beam Position Sensing Thermopile Power Sensors utilize a quadrant thermopile detector disk to sense the position of the laser beam on the detector surface while measuring the laser power. Coherent thermopile sensors can operate across a wide range of input powers, and do not saturate. Note: The LM-20 is designed for embedded use and must be mounted on a heat sink. Specifications General Model Number: LM-45 HTD Coherent Part Number: 1098320 Type: Meter required Linearity (%): ±1 Calibration Uncertainty (%): ±2 Long Pulse Joule Mode Range (J): 0.5 – 10 Long Pulse Joule Mode Accuracy (%): ±3 Cooling Method: Air Compatible Meters: #35-203 , #59-978 , #88-411 , #66-277 Physical & Mechanical Properties Active Diameter (mm): 19 Optical Properties Calibration Wavelength (nm): 10,600 Wavelength Range (μm): 0.25 – 10.6 Sensor Type of Sensor: Quad Element Thermopile Electrical Spectral Compensation Accuracy (%): ±1.5 Maximum Incident Beam Power (W): 45 Hardware & Interface Connectivity Length of Cable (m): 2.5 Computer Interface: DB-25 Regulatory Compliance RoHS 2015: Exempt × Reach 224: Contains SVHC(s) × Certificate of Conformance: View ×