Coherent Lasercam USB Laser Beam Profiler 1282868 | 1/2″ Format

Product Details 12 and 14-bit Digital USB 2.0 Interface Options High Sensitivity and Dynamic Range Intuitive BeamView Software Included The Coherent Lasercam Beam Profiler features excellent signal-to-noise ratio and linear response for accurate pulsed as well as CW laser beam dimension and uniformity measurements. The new BeamView 4.4 interface software features TCP/IP control and NI LabVIEW library suite, enabling efficient and smooth integration of beam profiling into any application. Examples of analysis functions that can be performed on the acquired beam images include: beam centroid location, beam peak intensity position, pointing stability, total relative power/energy in beam, peak power/energy density of beam, beam divergence, ellipticity, beam intensity uniformity, Gaussian fit, beam diameter/width based on second moments or user selectable percentage of peak/total energy. Specifications Physical & Mechanical Properties Dimensions (mm): 68.1 x 79.3 x 40.9 (with LDFP) Weight (g): 110 (without cable) Dimensional Accuracy: ±1% (typical), ±5% max (over entire spectral and dimensional range) Optical Properties Beam Diameter, 1/e 2 (mm): Recommended: 0.15mm min, 4.0mm max Spectral Range: 190 – 1100nm (400 – 1100nm with LDFP) CW Saturation: 13 mW/cm 2 (at 632.8nm with LDFP) Pulsed Saturation: 0.4 mJ/cm 2 (at 1.06μm with LDFP) Peak Intensity: Recommended: 75-95% of camera saturation Damage Threshold, By Design: Damage threshold for optical components varies by substrate material and coating. Click here to learn more about this specification. 32 mJ/cm 2 @ 1.06μm without Low Distortion Faceplate Sensor Sensing Area, H x V (mm): 5.9 x 4.8 Gamma: 1.00 Sensor Format: 1/2″ Frame Rate: 27Hz (Live Mode), 10Hz (with calculations) Exposure Time: Fixed at 10ms Electrical Signal to Noise S/N Ratio (dB): >60 Gain (dB): Gain is factory set for optimum linear dynamic range, not user adjustable Peak Noise (nW/cm 2 ): 24 (at 632.8nm) Pulse Trigger: TTL, rising or falling edge Hardware & Interface Connectivity Operating System: Windows Threading & Mounting Mount: C-Mount Environmental & Durability Factors Operating Temperature (°C): -20 to 60 Regulatory Compliance RoHS 2015: Exempt × Reach 224: Contains SVHC(s) × Certificate of Conformance: View ×