Coherent PowerMax USB PS19Q Measurement System 1168343 | 1W Max Power

Product Details Thermopile Detector Element for High Power Measurements Measure Beam Position on Detector Surface ISO 17025 Certified Coherent Beam Position Sensing Thermopile Power Sensors are all-purpose sensors designed to measure the average power or energy of a wide variety of continuous wave or pulsed lasers. Coherent Beam Position Sensing Thermopile Power Sensors utilize a quadrant thermopile detector disk to sense the position of the laser beam on the detector surface while measuring the laser power. Coherent thermopile sensors can operate across a wide range of input powers, and do not saturate. Note: The LM-20 is designed for embedded use and must be mounted on a heat sink. Specifications General Model Number: PS19Q Coherent Part Number: 1168343 Type: Meterless Linearity (%): ±1 Calibration Uncertainty (%): ±2 Long Pulse Joule Mode Range (J): 0.001 – 1 Long Pulse Joule Mode Accuracy (%): ±3 Cooling Method: Air Response Time (s): 2 Note: Includes a Wedged Quartz Window to Eliminate Thermal Background Radiation and Air Current Effects Maximum Incident Energy Density: 50mJ/cm 2 (10ns, 1064nm) Physical & Mechanical Properties Active Diameter (mm): 19 Optical Properties Calibration Wavelength (nm): 514 Wavelength Range (nm): 300 – 2100 Wavelength Range (μm): 0.3 – 2.1 Sensor Type of Sensor: Thermopile Electrical Spectral Compensation Accuracy (%): ±1.5 Maximum Incident Power Density (kW/cm 2 ): 0.5 Power Range: 100µW – 1W Minimum Power (mW): 0.1 Maximum Power (W): 1 Noise Equivalent Power: 3µW Hardware & Interface Connectivity Length of Cable (m): 2.5 Computer Interface: USB Environmental & Durability Factors Thermally Stabilized: Yes Regulatory Compliance RoHS 2015: Exempt × Reach 224: Contains SVHC(s) × Certificate of Conformance: View ×